This article will introduce you to features of the Kajeet SmartSpot Hotspot and will also show you how to connect to the Hotspot on an iPad.
Introduction
This is your Hotspot. Here is a layout of all of its parts:
- Power Button - Hold down power button for about 3 seconds to either turn the Hotspot On or Off. This button also selects options in the menu.
- LCD Screen - This is the display that shows all of the information available on the Hotspot. Even if this display turns off, the Hotspot is still on and operating.
- Menu Button - This button allows you to navigate the options available on the Hotspot.
How to connect your iPad to your Hotspot
1. First, turn on your Hotspot.
2. Next, press the menu button until you see this screen:
3. Now press the power button. You will see this screen:
- The first line is the Wi-Fi name. It will say “Kajeet SmartSpot” followed by a 4 character combination of letters and numbers. (Example: Kajeet SmartSpot A12B)
- You can ignore the second line which states the type of Wifi Protected Access.
- The third line is the password. You will be asked for this when selecting the Hotspot on your iPad.
Now that you have this information, we will go over to the iPad and connect the Hotspot.
- Open the Settings application.
- On the left side of the screen select Wi-Fi. Then, select “Kajeet SmartSpot xxxx” (Make sure the X’s match the 4 numbers and letters found in your Hotspot settings).
- Once you tap Kajeet SmartSpot, you will be asked for a password. Enter the password that is found in your Hotspot settings.
- When the password has been entered correctly, wait about 5-10 seconds for the iPad to connect to the Hotspot. When it is finished, you will see a blue check mark next to Kajeet SmartSpot.
Now your iPad is connected to the Hotspot! Please note that the Kajeet SmartSpot provided by Watsonville Prep School is ONLY to be used by Navigator School students.
Please be patient with the Hotspot, as it is very slow; especially when multiple Navigator School students are connected to it. Please be tolerant of any slowness or dropped connections. You can easily remedy this by turning the Hotspot off and turning it back on.
Please remember to always keep the Hotspot plugged in. The battery drains quickly while in use. Also remember to turn the Hotspot off when not in use and to not let students connect to it outside of school hours (except when instructed to do so by a teacher or school administrator).
Este artículo le presentará las características del Hotspot Kajeet SmartSpot y también le mostrará cómo conectarse al Hotspot en un iPad.
Kajeet SmartSpot Introducción
Este es su Hotspot. Aquí esta el diseño de todas sus partes:
- Botón de Encendido - Mantenga presionado este botón durante aproximadamente 3 segundos para encender o apagar el Hotspot. Este botón también selecciona opciones en el menú.
- Pantalla LCD- Esta es la pantalla que muestra toda la información disponible en el Hotspot. Incluso si esta pantalla se apaga, el Hotspot sigue encendido y funcionando.
- Botón de Menú - Este botón le permite navegar por las opciones disponibles en el Hotspot.
Cómo Conectar su iPad a el Hotspot
1. Primero, encienda su Hotspot.
2. A continuación, presione el botón de menú hasta que vea esta pantalla:
3. Ahora presione el botón de encendido. Verá esta pantalla:
- La primera línea es el nombre del Wi-Fi. Dirá “Kajeet SmartSpot” seguido de una combinación de 4 caracteres de letras y números. (Ejemplo: Kajeet SmartSpot A12B)
- Puede ignorar la segunda línea que indica el tipo de acceso protegido Wifi.
- La tercera línea con el candado es la contraseña. Se le pedirá cuando seleccione el Hotspot en su iPad.
Ahora que tiene esta información, pasaremos al iPad y conectaremos a él Hotspot.
- Toque la aplicación de configuración.
- A la izquierda, busque y toque Wi-Fi. Luego, busque y toque “Kajeet SmartSpot xxxx” (asegúrese de que las ‘x’ coincidan con los 4 números y letras que se encuentran en la configuración de su Hotspot).
- Una vez que toque Kajeet SmartSpot, se le pedirá una contraseña. Ingrese la contraseña que se encuentra en la configuración de su Hotspot.
- Cuando la contraseña se haya ingresado correctamente, espere entre 5 y 10 segundos para que el iPad se conecte al Hotspot. Cuando haya terminado, verá una marca de verificación azul junto a Kajeet SmartSpot.
¡Ahora su iPad está conectado al Hotspot! Tenga en cuenta que el Kajeet SmartSpot proporcionado por Navigator Schools solo debe ser utilizado por los estudiantes de Navigator.
Tenga paciencia con el Hotspot, ya que es muy lento; especialmente cuando varios estudiantes de Navigator Schools están conectados a él. Sea tolerante con cualquier lentitud o conexiones caídas. Puede remediar esto fácilmente apagando el Hotspot y volviéndolo a encender.
Recuerde mantener siempre el Hotspot enchufado. La batería se agota rápidamente mientras está en uso. Incluso recuerde apagar el Hotspot cuando no esté en uso y no permitir que los estudiantes se conecten a él fuera del horario escolar (excepto cuando se lo indique un maestro o administrador de la escuela).
Comments
0 comments
Article is closed for comments.